During the development of our Guide Rollers with compression spring system we have set ourselves the ultimate goal is to construct a self-regulating system that crane and trolley travel movements leads to a defined alignment.
To achieve this, a roll head end has been developed that in the housing of the guide head is suspended floatingly. The center position corresponds to the specified alignment. The central receives the support of both springs occurs at the roller head horizontal or skew forces and forwards it via the appropriately loaded pressure springs in the housing. This head rigidly connected to the carrier, these forces are introduced into the sprung.
Depending on the construction crane and crane runway we can offer you two options:
We welcome your inquiries and assist you with any technical questions feel free to ask.
Are you looking for heavy duty trestle in your production area? Then we have something suitable for you!
We manufacture especially for your requirements in the factory and can thus support production optimization. Components with a weight of up to 100t and, in some cases, even more, can safely be deposited with our heavy load trestles.
Please use for your request
our checklist and send it to us
firstname.lastname@example.org. We would be pleased to make you a suitable offer for your requirements. Kranservice HerZ
We have expanded our range of services and can now also offer you the performance of the UVV test on your shelves and shelving systems.
Our expert inspection for shelves / shelving systems is carried out according to BetrSichV, DIN EN 15635, DGUV Information 208-043 (formerly BGI 5166) and DGUV Shelf 108-007 (formerly BGR 234).
After defect-free UVV testing, your shelves will receive our inspection label.
Our UVV protocol to be drawn up documents the implementation as well as any deficiencies identified.
Any defect removal, which is necessary, is carried out according to the manufacturing specifications, so that your racks can continue to be used without any danger.