With Wind Load Protections is it possible that cranes can be fixed with the help of a cheek on the crane rail. The holding forces are dependent here on the wheel loads of the crane (0 -200 kN / 0 -20.0 t).
The wind load protections are universally applicable.They can be used in recessed and exposed crane rails. In crane driving the wedge retainer bracket has completely disappeared in the housing, so there is no driving impairment can occur. In the development of this type of wind protection we have entered new territory. It was preceded by considerations of developing storm protections for crane tracks whose rails are sunk. In these systems, the use of conventional rail pincers is often not possible. The principle of the wind load protection is if the cran has got wind load the system "jacked up" the cran. The safety function is ensured even in case of power failure. The jacking is a specially designed wedge system that is mounted on the crane runway rail. The suspension system of the wedge corresponding to a ball joint, whereby an optimal application of the wedges is achieved on the rail head. The application and ventilation of this wind load protection is developed with a specifically hydraulic system unit through which an integrated cylinder block is driven.
For the electrical control of the wind load protection, we usually recommend the following four versions:
The wind load protection can be supplied in different housing variants:
The housing can also be supplied with buffer gain.
Are you looking for heavy duty trestle in your production area? Then we have something suitable for you!
We manufacture especially for your requirements in the factory and can thus support production optimization. Components with a weight of up to 100t and, in some cases, even more, can safely be deposited with our heavy load trestles.
Please use for your request
our checklist and send it to us
email@example.com. We would be pleased to make you a suitable offer for your requirements. Kranservice HerZ
We have expanded our range of services and can now also offer you the performance of the UVV test on your shelves and shelving systems.
Our expert inspection for shelves / shelving systems is carried out according to BetrSichV, DIN EN 15635, DGUV Information 208-043 (formerly BGI 5166) and DGUV Shelf 108-007 (formerly BGR 234).
After defect-free UVV testing, your shelves will receive our inspection label.
Our UVV protocol to be drawn up documents the implementation as well as any deficiencies identified.
Any defect removal, which is necessary, is carried out according to the manufacturing specifications, so that your racks can continue to be used without any danger.